Camshaft Position Sensor – Fits Nissan Cube, Juke, Micra, Navara NP300, Pulsar, Qashqai, X-Trail – OEM 23731-00Q0M / 23760-00Q0D / 23760-00Q0E

Description

✅ Product Overview

The camshaft position sensor provides crucial timing signals to the ECU to control fuel injection and ignition.
A worn or failed sensor can cause hard starting, misfires, poor fuel economy, or a lit check-engine light (e.g. code P0340).
This direct-fit replacement matches OEM part numbers 23731-00Q0M / 23760-00Q0D / 23760-00Q0E and restores factory-correct timing accuracy for smoother engine performance and lower emissions.

---

⚙️ Key Features & Benefits

• OEM-equivalent performance – built to meet or exceed factory specifications

• Direct bolt-on replacement – no wiring modification required

• Precision electronics ensure fast, stable signal output for optimal combustion

• Improves cold-start reliability, throttle response and fuel efficiency

• Durable housing and heat-resistant components for long service life

• 100 % brand-new & individually tested before dispatch

• 12-month warranty for peace of mind

---

🛠️ Technical Specifications

---

🚗 Vehicle Compatibility

(Always confirm OEM part number before purchase.)

• Nissan Cube (Z12) – 1.5 CDi – from 2010

• Nissan Juke (F15) – 1.2 DIG / 1.5 DCi – from 2010

• Nissan Micra III / V (K12 / K14) – 0.9 IG-T / 1.5 DCi – from 2016

• Nissan Note (E11 / E12) – 1.5 DCi – from 2013

• Nissan NP300 Navara (D23) – 2.3 DCi – from 2015

• Nissan NV200 / Evalia – 1.5 DCi – from 2010

• Nissan NV300 (X82) – 1.6 DCi – from 2016

• Nissan NV400 (X62) – DCi 100/125/140/145/160/165/170 – 2.3 DCi – from 2011

• Nissan Pulsar (C13) – 1.5 DCi – from 2014

• Nissan Qashqai / Qashqai +2 I/II (J10/J11) – 1.5 DCi / 1.6 DCi – from 2013

• Nissan Tiida (C11) – 1.5 DCi – 2007-2011

• Nissan X-Trail (T32) – 1.6 DCi – from 2014

---

🟩 FAQ – Common Questions about Camshaft Position Sensors

🔎 1. What are the symptoms of a bad camshaft sensor?

• Hard starting or no-start condition

• Check-engine light (e.g. P0340/P0341 fault codes)

• Rough idle, engine stalling or hesitation during acceleration

• Drop in fuel efficiency or loss of power

---

🔎 2. Will replacing the sensor fix my check-engine light?

If diagnostics show the camshaft sensor is faulty, replacing it will usually clear fault codes and restore proper timing signals.
Be sure to clear stored codes with an OBD-II scanner after installation.

---

🔎 3. Is this sensor easy to install?

Yes – most applications require only basic hand tools to remove a single retaining bolt and connector.
For tight engine bays or if you’re unsure, professional fitting is recommended.

---

🔎 4. Do I need to reset the ECU after fitting?

Resetting isn’t mandatory, but clearing any stored fault codes helps the ECU learn the new sensor faster and extinguishes the warning light.

---

🔎 5. Does this sensor work for both diesel and petrol engines?

Yes – it’s designed for the listed Nissan diesel (DCi) and compatible petrol engines that share these OEM part numbers.

---

🔎 6. How long should a camshaft sensor last?

A quality replacement like this typically lasts many years under normal driving conditions, provided the wiring harness and connector remain in good condition.

---

💡 Pro Tip

Before fitting the new sensor, inspect the wiring harness and connector pins for corrosion or damage.
A poor electrical connection can mimic sensor failure, so cleaning or repairing the plug can save future troubleshooting.